Siemens Dishwasher & Cooking Repair Montreal
We service Siemens studioLine & classic platforms. OEM parts, thorough diagnostics, careful installation, one-year parts & labour warranty.
We service Siemens studioLine & classic platforms. OEM parts, thorough diagnostics, careful installation, one-year parts & labour warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Siemens Residential or Commercial appliances.
Flash Repair
BSH platforms feature advanced sensors and quiet operation. We carry common pumps, valves, heat pumps/elements, NTCs, fans and control modules.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E15 | Leak detected / base float | Dry base; repair leak; reset float switch. |
| E24 | Drain error | Clear filter/air gap/hoses; test drain pump. |
| E25 | Drain pump blocked | Remove blockage; replace pump if seized. |
| E09 | Heater/heat pump fault | Replace heat pump assembly; check wiring. |
| E10/E11 | NTC sensor fault | Replace temperature sensor/board channel. |
| E14 | Flow meter fault | Replace flow sensor; check fill valve. |
| E17 | Overfill / inlet pressure | Check valve & pressure; replace valve. |
| E18 | Low fill / timeout | Clean screens; test valve; verify supply. |
| E01/E02 | Control/relay fault | Replace power/control module. |
| E07 | Sump cover blocked (water level) | Clear cover; reseat. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E005/E011 | Touch control error | Power reset; replace touch module/PCB. |
| E115/E118 | Over-temp / NTC fault (induction) | Verify cooling; replace NTC/module. |
| E621/E622 | IGBT/power module fault | Replace inverter/power module. |
| E512 | Pan detection error | Check coil/sensor; cookware compatibility. |
| F2 | Runaway temperature (oven) | Replace RTD/control. |
| F3/F4 | Sensor open/short | Replace sensor/harness. |
| F7 | Key stuck / UI | Replace keypad/UI. |
| F8 | Cooling fan error | Replace fan/board. |
| F9 | Door lock fault | Service lock motor & switches. |
| PF | Power failure | Clear; verify supply. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm