Moffat Appliance Repair Montreal
We repair Moffat appliances—Canadian GE sub-brand platforms. OEM-quality parts, clear estimates, and a one-year parts & labour warranty.
We repair Moffat appliances—Canadian GE sub-brand platforms. OEM-quality parts, clear estimates, and a one-year parts & labour warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Moffat Residential or Commercial appliances.
Flash Repair
We fix Moffat refrigerators, ranges, dishwashers, washers and dryers. Many parts cross with GE/Hotpoint appliances, helping speed up repairs and keep costs predictable. We fully test after repair and share easy preventive tips.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F1 | Main control/EOC fault | Power reset; replace control if code returns. |
| F2 | Runaway oven temperature | Check RTD (~1080Ω @ 70°F); replace sensor/control. |
| F3 | Oven sensor open | Repair harness; replace RTD. |
| F4 | Oven sensor short | Replace RTD; inspect board input. |
| F7 | Keypad stuck / UI fault | Reseat ribbon; replace keypad/UI. |
| F8 | Cooling fan speed error | Test/replace fan; check tacho. |
| F9 | Door latch error (self-clean) | Replace latch motor/switch; align door. |
| IGN | Ignition failure (gas) | Replace igniter/valve; verify pressure & conversion. |
| PF | Power failure | Clear; verify supply/neutral/ground. |
| CF | UI ⇄ main control comm fault | Inspect connectors/harness; replace UI/control. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| HI TEMP | Compartment above setpoint | Clean condenser; verify fans/compressor; sealed-system diagnostics. |
| dO | Door open timeout / switch fault | Adjust hinges; replace door switch/gasket. |
| SENS | Thermistor out of range | Ohm sensors; replace NTC/control. |
| DF | Defrost failure (ice on evap) | Test heater, bi-metal, control output. |
| FAN | Evaporator or condenser fan error | Replace fan; clear ice/debris; check tacho. |
| ICE | Icemaker harvest/fill fault | Run IM test; replace module/valve. |
| INV/COMP | Inverter/compressor fault | Check DC bus & windings; replace inverter/compressor. |
| UI/COM | UI ⇄ control comm error | Reseat connectors; replace control/UI. |
| H2O/Filter | Water filter reminder/flow | Replace filter; purge air; check pressure. |
| PF | Power failure | Clear alarm; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| C1/C2 | Fill/drain fault (GE) | Verify inlet valve or drain pump/hoses; clear air gap. |
| E1 | Fill timeout | Open supply; clean screen; replace valve/flow meter. |
| E2 | Drain timeout / restriction | Clear filter/hoses; replace drain pump. |
| E3 | Heating fault / low temp rise | Ohm element/NTC; replace heater/relay. |
| E4 | Overflow/leak detected (base) | Dry tray; correct leak; reset float switch. |
| E5 | Wash motor fault | Inspect impeller; replace circulation motor. |
| E6 | Turbidity/NTC sensor error | Clean/replace sensor; check harness. |
| E7 | Door/latch error | Adjust door; replace latch. |
| UI | Console/UI error | Reseat ribbon; replace UI. |
| PF | Power failure | Clear and retest; verify circuit. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E16 | Fill fault / low flow | Open valves; clean screens; replace inlet valve. |
| E22 | Drain timeout | Clear pump/hoses; replace drain pump. |
| E31 | Out-of-balance | Level machine; inspect suspension/shocks. |
| E42 | Lid/door lock fault | Replace lock assembly; check strike. |
| E54 | Motor tach signal fault | Test motor & hall; belt; control/inverter. |
| E66 | Heater relay stuck (front-load) | Replace control/relay board. |
| E68 | Heater leakage to ground | Megger element; replace if shorted. |
| COM | UI ⇄ control comm error | Inspect connectors; replace board/UI. |
| SUD | Excess suds detected | Use HE detergent; run rinse; clean dispenser. |
| PF | Power failure | Clear; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| tS/tF | Thermistor short/open | Ohm thermistor; replace sensor/control. |
| HE | Heater fault (electric) | Test element/relay/thermal cutoffs; replace failed part. |
| gH | Gas heat failure | Check igniter, coils, valves; airflow. |
| AF | Restricted airflow | Clean duct; correct length/kinks; verify blower. |
| E41 | Door switch fault | Replace door switch/latch. |
| L2 | Low line voltage (electric) | Check receptacle/breaker/terminal block. |
| MTR | Motor not starting/overload | Test capacitor/motor; replace if seized. |
| UI | Keypad/UI error | Replace UI or main board. |
| PF | Power failure | Reset and test; verify supply. |
| SENS | Moisture sensor fault | Clean bars; replace harness/sensor. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm