Expert service for Kenmore-branded appliances built by leading OEMs (Whirlpool, Frigidaire, LG, GE, Samsung & others). We stock common parts, provide upfront estimates and back repairs with a one-year parts & labour warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Kenmore Residential or Commercial appliances.
Flash Repair
Kenmore models span multiple OEM platforms. Our techs identify the platform by model/serial to apply the correct diagnostics and parts. We carry common boards, valves, pumps, sensors, igniters, elements and fans for efficient first-visit fixes. Every repair includes full functional testing and a written warranty.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F6-E1 / i10 | No/low water fill (Whirlpool / Frigidaire) | Open supply; clean inlet screen; test valve & flow meter; verify pressure. |
| F9-E1 / i20 / C2 | Drain time exceeded / restriction | Clear filter, hose, air gap; test drain pump; ensure disposer knockout removed. |
| F7-E1 / i60 | Heater not heating / low temp rise | Ohm element & NTC; inspect control relay; replace failed parts. |
| F3-E3 | OWI/Turbidity sensor fault (Whirlpool) | Clean OWI lens; check harness; replace sensor. |
| i30 | Leak detected / base float active (Frigidaire) | Dry tray; correct leak source; reset float. |
| F2-E1/E2 | Stuck key / UI mismatch | Clean keypad; reseat ribbon; replace console or UI/control. |
| H20 / C1 | Fill fault (GE) | Verify inlet valve & pressure; clean screens. |
| UO/ER | Vent fan open / UI error | Test vent motor; replace UI board as required. |
| PF | Power failure during cycle | Clear and retest; confirm circuit. |
| CL | Control lock active | Unlock via panel; verify UI function. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F2/F20/F10 | Runaway temperature (various OEMs) | Check oven sensor ~1080Ω @ 70°F; verify stuck relays; replace sensor/control. |
| F3/F4/F30/F31 | RTD open/short | Repair harness; replace RTD or board. |
| F7/F11 | Stuck key / keypad error | Reseat ribbon; replace touch panel/UI. |
| F90/F9/E0 | Door lock/latch fault (self-clean) | Test lock motor & switches; replace latch assembly. |
| F8-E3/F43 | Cooling fan speed below target | Test fan & tacho; replace fan or relay board. |
| IGN | Ignition failure (gas) | Measure igniter current ≥3.2A; replace igniter or valve. |
| F6-E1 | Control/relay board comm error | Inspect power/neutral; replace relay or main board. |
| PF | Power failure | Clear; verify supply/ground/neutral. |
| Probe | Meat probe error | Replace probe/jack; inspect control input. |
| LOC/SAB | Control lock/Sabbath active | Unlock/exit Sabbath per manual. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| Er IF / IF E | Icemaker or freezer fan error (LG/Samsung) | Replace evap fan; clear ice; check hall sensor & wiring. |
| Er dH / 1E | Defrost abnormal | Test heater/bi-metal/defrost sensor; replace board if no drive. |
| SY CF / CF | Control ⇄ UI communication fault | Reseat connectors; replace UI/main board. |
| Er FF | Fresh food fan error | Replace fan; inspect for frost build-up. |
| dO | Door open / switch fault | Adjust hinges; replace door switch/gasket. |
| H / HI | High temperature alarm | Clean condenser; verify fans/compressor; sealed-system diagnostics. |
| INV / COMP | Inverter/compressor failure | Test inverter DC & windings; replace inverter/compressor. |
| ICE | Icemaker harvest/fill fault | Run IM test; replace module/motor/valve. |
| Filter/H2O | Water filter reminder | Replace filter; reset indicator. |
| PF | Power failure | Clear alarm; verify supply/surge. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F9-E1 / OE | Long drain / no drain (Whirlpool / LG) | Clear pump & hoses; check standpipe height; replace drain pump if weak. |
| F8-E1 (LO FL) / IE | No/low water fill | Open valves; clean screens; replace inlet valve; verify pressure. |
| F5-E2 / dE | Lid/door lock not engaging | Adjust strike; replace lock assembly. |
| F7-E1 / LE | Shifter/actuator or motor locked | Test actuator & motor; replace actuator or stator/rotor as required. |
| F0-E5 / UE | Off-balance / unbalance | Redistribute load; level; inspect suspension/shocks. |
| F7-E7/E9 / dL | Motor unable to reach speed / door lock | Check belt/basket/capacitor; replace failed part. |
| FE / PE | Water level sensor error (LG) | Check pressure hose; replace sensor. |
| tE / E3 | Temp or motor tach error | Replace thermistor / hall sensor; check wiring. |
| F6-E3 | UI ⇄ control comm error (Whirlpool) | Inspect connectors & power; replace board if persistent. |
| SD / SUDS | Excess suds detected | Use HE detergent; run rinse; clean dispenser & pressure hose. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| AF / d80/d90 | Restricted airflow / venting (Whirlpool / LG) | Clean vent & lint path; correct length/kinks; verify blower & pressure switch. |
| L2 | Low line voltage (electric) | Check breaker, receptacle, terminal block; repair wiring. |
| F01 / tE1/tE2 | Main control failure / thermistor faults | Replace control board / thermistor; inspect harness. |
| E64 / HE | Heater open / no heat | Test element or gas system (igniter, coils); replace failed part. |
| PF | Power failure | Clear and restart; verify supply. |
| dO / E80 | Door open / switch fault | Replace door switch/latch; adjust strike. |
| tS/tF | Exhaust thermistor short/open | Ohm NTC; replace sensor or board channel. |
| Mtr / E61 | Motor or relay fault | Test motor, run cap, relay; replace as needed. |
| E5B | No heat overall (Frigidaire platform) | Diagnose heater/thermostats/relay & wiring. |
| LOC | Control lock active | Unlock per manual; verify UI. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm