Beaumark Appliance Repair Montreal
Specialized in-home Repair and Installation of Beaumark appliances (many models share platforms with GE/Hotpoint-era units in Canada).
Specialized in-home Repair and Installation of Beaumark appliances (many models share platforms with GE/Hotpoint-era units in Canada).
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Beaumark Residential or Commercial appliances.
Flash Repair
We service legacy Beaumark kitchen and laundry appliances across Montreal. Because many models were built on GE/Hotpoint platforms, parts and service procedures are straightforward. We stock common components and provide clear, upfront quotes.
After the repair, your technician fully tests the unit, answers questions, and shares maintenance tips. All work is backed by a one-year parts & labour warranty.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| No drain / beeps | Drain pump blocked or hose kinked | Clear filter/air gap/hoses; replace drain pump if seized. |
| No heat / wet dishes | Heater/NTC fault | Test element & sensor; inspect control relay; replace failed parts. |
| Won’t fill | Inlet valve or low pressure | Open valve; clean screen; replace inlet valve if weak. |
| Overfill / leak | Float/overflow switch tripped | Dry base; repair leak source; reseal sump/hose. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F1/F7 | Keypad stuck / control fault | Reseat ribbon; replace touchpad or EOC as required. |
| F2 | Runaway temperature / overheat | Test oven sensor (RTD) & relays; replace failed part. |
| F3/F4 | RTD open/short | Ohm ~1080Ω @ 70°F; repair wiring or replace sensor. |
| F9 | Door lock fault (self-clean) | Test latch motor & switches; replace latch assembly if needed. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| HI / d | High temperature or door open | Clean condenser; adjust hinges; replace gasket/switch. |
| Sensor | Cabinet/evap thermistor out of range | Ohm sensors; replace NTC/control as needed. |
| Defrost | Ice on evap / warm fresh food | Test heater/bi-metal/timer/ADC; replace failed part. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F9-E1 / LD | Long drain | Clear pump trap/hoses; replace drain pump if weak. |
| F8-E1 / LO FL | No/low fill | Open valves; clean screens; replace inlet valve. |
| F5-E2 | Lid lock fault | Adjust strike; replace lock assembly. |
| F7-E1 | Shifter/speed sensor fault | Test actuator & wiring; replace actuator or control. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| AF / F4-E3 | Restricted airflow | Clean vent/duct; check blower & exhaust thermistor. |
| L2 | Low line voltage (electric) | Check breaker/receptacle/terminal block. |
| F01 | Main control failure | Inspect for thermal events; replace control if confirmed. |
| F3-E2 | Exhaust thermistor open/short | Ohm thermistor; repair wiring or replace part. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm