Hotpoint Appliance Repair Montreal
In-home Repair and Installation for Hotpoint (GE family) value-line kitchen and laundry appliances. OEM parts, clear estimates, one-year parts & labour warranty.
In-home Repair and Installation for Hotpoint (GE family) value-line kitchen and laundry appliances. OEM parts, clear estimates, one-year parts & labour warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Hotpoint Residential or Commercial appliances.
Flash Repair
We service Hotpoint refrigerators, electric/gas ranges and wall ovens, dishwashers, and laundry. Technicians carry common parts and provide upfront pricing before any work begins.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H20 | Fill fault / low water | Open supply; clean inlet screen; test inlet valve & pressure. |
| C2 | Drain time exceeded | Clear filter/air gap/hoses; test drain pump. |
| C3 | Flood/leak detected in base | Dry tray; check float/micro-switch; fix leaks. |
| C1 | Overfill / water level error | Check pressure/OWI; inspect for stuck valve. |
| Ftd | Heater not reaching temp | Test element & NTC; inspect control relay. |
| 999 | Control fault (service code) | Power reset; replace board if persistent. |
| UO | Vent fan open (select) | Test vent motor; replace as needed. |
| LE | Leak error (newer units) | Locate/repair leak; dry base; reset. |
| KEY | Key stuck / UI fault | Reseat ribbon; replace console or UI PCB. |
| PF | Power failure | Clear and retest; verify circuit. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F2/F20 | Runaway temperature | Test RTD (~1080Ω @ 70°F) and stuck relays; replace as needed. |
| F30/F31 | Oven sensor open/short | Repair harness; replace RTD/control. |
| F90 | Door lock/latch error (self-clean) | Service lock motor/switches; replace latch. |
| F7 | Keypad stuck / UI error | Reseat ribbon; replace touch panel. |
| IGN | Ignition failure (gas) | Measure igniter current ≥3.2A; replace igniter/valve. |
| F76/F79 | UI ⇄ control communication | Inspect connectors; replace board/UI. |
| F97 | Cooling fan speed/feedback low | Test fan & tacho; replace fan or board. |
| Probe | Meat probe short/open (if equipped) | Replace probe/jack/control. |
| PF | Power failure | Clear; verify supply/neutral/ground. |
| LOC | Control lock active | Unlock per manual; verify keypad. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H | High temperature alarm | Clean condenser; test fans; sealed-system diagnostics. |
| d | Door open/ajar | Level cabinet; adjust hinges; replace switch/gasket. |
| FF/FZ | Fresh food / freezer sensor fault | Ohm NTCs; repair harness; replace sensor/control. |
| DF | Defrost failure | Test heater/defrost sensor; replace board if no drive. |
| FAN | Evap/condenser fan error | Replace motor; clear ice; check wiring. |
| ICE | Icemaker harvest/fill fault | Run IM test; replace module/motor/valve. |
| INV | Inverter/compressor error (select) | Test inverter signals/DC; replace inverter/compressor. |
| Filter | Water filter reminder | Replace filter; reset indicator. |
| CF | Control fault | Power reset; replace main board if persistent. |
| PF | Power failure | Clear alarm; verify supply/surge. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F26 | Lid lock not engaging (top-load) | Adjust strike; replace lid lock assembly. |
| F21 | Drain timeout | Clear pump/hoses; replace drain pump if weak. |
| F45 | Inverter/drive communication | Inspect harness; replace inverter or control. |
| E43 | Door lock error (front-load) | Replace door lock assembly. |
| E22 | Fill fault / low pressure | Open valves; clean inlet screens; test inlet valve. |
| E51 | Motor tachometer fault | Test motor & hall sensor; replace as required. |
| E66 | Heater relay fault (front-load) | Replace board/relay; test element. |
| UB | Unbalance detected | Level cabinet; inspect shocks/suspension. |
| CL | Child lock active | Unlock per manual. |
| PF | Power failure | Clear; verify outlet/breaker. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| tS/tF | Thermistor short/open | Ohm NTC; replace sensor/control. |
| E64 | Heater open (electric) | Test element & relays; replace failed part. |
| E80 | Low airflow / restriction | Clean vent & lint path; check blower. |
| E5B | No heat (gas/electric) | Check igniter/gas valve or element/thermostats. |
| E32 | Moisture sensor fault | Clean bars; check harness; replace PCB. |
| E41 | Door switch fault | Replace door switch/latch. |
| L2 | Low line voltage | Verify supply/breaker/receptacle. |
| E61 | Motor/capacitor fault | Test motor & cap; replace if defective. |
| PF | Power failure | Clear and retest. |
| LOC | Control lock active | Unlock per manual; verify UI. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm