Hisense Appliance Repair Montreal
We service Hisense kitchen and laundry appliances with OEM-quality parts and precise diagnostics. Clear estimates, protected finishes, and a one-year parts & labour warranty.
We service Hisense kitchen and laundry appliances with OEM-quality parts and precise diagnostics. Clear estimates, protected finishes, and a one-year parts & labour warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Hisense Residential or Commercial appliances.
Flash Repair
We handle Hisense sealed-system cooling, inverter boards, fan systems, icemakers, range ignition & elements, dishwasher wash/heat/Drain, and laundry motors, pumps, and control modules. We aim for first-visit fixes and provide care instructions to prevent repeat issues.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E1 | Water inlet/fill error | Open supply; clean screen; replace inlet valve/flow meter. |
| E2 | Drain timeout / restriction | Clear filter/air gap/hoses; replace drain pump. |
| E3 | Heating failure / low temp rise | Test element/relay; replace heater or control. |
| E4 | Leak/overflow detected (tray) | Dry base; fix leak source; reset float/micro-switch. |
| E5 | Wash motor fault | Inspect impeller; replace circulation motor. |
| E6 | Turbidity/NTC sensor fault | Clean/replace sensor; check harness. |
| E7 | Door/latch error | Adjust door; replace latch switch. |
| E8 | UI communication fault | Reseat ribbon; replace UI or main board. |
| CL | Control lock active | Disable lock via panel. |
| PF | Power failure | Clear and retest; verify circuit. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F1 | Main control/EEPROM fault | Power reset; replace control if returns. |
| F2 | Runaway oven temperature | Verify RTD (~1080Ω @ 70°F) & relays; replace sensor/control. |
| F3/F4 | Oven sensor open/short | Ohm RTD; repair harness; replace sensor/board. |
| F5 | Key stuck / UI fault | Reseat ribbon; replace keypad/UI. |
| F7 | Communication error | Inspect connectors; replace board/UI. |
| F8 | Cooling fan speed error | Test/replace fan; check tacho output. |
| F9 | Door latch error (self-clean) | Replace latch motor/switch; align door. |
| IGN | Ignition failure (gas) | Replace igniter/module/valve; verify pressure. |
| LOC | Control lock/Sabbath active | Disable lock via panel. |
| PF | Power failure | Clear; verify supply/neutral/ground. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H / HI TEMP | High temperature alarm | Clean condenser; verify fans/compressor; sealed-system checks. |
| dO | Door open / switch fault | Adjust hinges; replace door switch/gasket. |
| E1/E2 | Fridge/Freezer sensor error | Ohm NTCs; replace sensor or board. |
| DEF | Defrost failure (ice on evap) | Test heater, fuse/bi-metal; board output. |
| FAN | Evaporator or condenser fan error | Replace fan; clear ice/debris; check tacho. |
| ICE | Icemaker harvest/fill fault | Run IM test; replace module/valve. |
| INV/COMP | Inverter/compressor fault | Check DC bus & windings; replace inverter/compressor. |
| UI/COM | UI ↔ control comm error | Reseat connectors; replace control/UI. |
| Filter | Water filter reminder | Replace filter; reset indicator. |
| PF | Power failure | Clear alarm; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E11 | Fill time too long | Open valves; clean screens; replace inlet valve. |
| E21 | Drain timeout | Clear pump/hoses; replace drain pump. |
| E23 | Leak/flood switch active | Dry base; locate leak; replace float/switch. |
| E41/E42 | Door/lid lock fault | Replace lock assembly; check strike. |
| E52 | Motor tach signal fault | Test motor/hall; belt; control/inverter. |
| E5A/E5E | Motor/inverter thermal/comm | Improve cooling; replace inverter. |
| E66 | Heater relay stuck (front-load) | Replace control or relay board. |
| E68 | Heater leakage to ground | Megger element; replace if shorted. |
| Ub | Unbalance detected | Level; inspect suspension/shocks. |
| PF | Power failure | Clear; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| tS/tF | Thermistor short/open | Ohm thermistor; replace sensor/control. |
| HE | Heater fault (electric) | Test element/relay/thermal cutoffs; replace failed part. |
| gH | Gas heat failure | Check igniter, coils, valves; airflow. |
| AF | Restricted airflow | Clean duct; correct length/kinks; verify blower. |
| E41 | Door switch fault | Replace door switch/latch. |
| L2 | Low line voltage (electric) | Check receptacle/breaker/terminal block. |
| MTR | Motor not starting/overload | Test capacitor/motor; replace if seized. |
| UI | Keypad/UI error | Replace UI or main board. |
| PF | Power failure | Reset and test; verify supply. |
| SENS | Moisture sensor fault | Clean bars; replace harness/sensor. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm