Blomberg Appliance Repair Montreal
Specialized in-home Repair and Installation of Blomberg kitchen and laundry appliances.
Specialized in-home Repair and Installation of Blomberg kitchen and laundry appliances.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Blomberg Residential or Commercial appliances.
Flash Repair
We service Blomberg’s compact European platforms: 24" dishwashers, 24/30" ranges, counter-depth fridges, and space-saving laundry. OEM parts, fair quotes, and a one-year warranty on parts & labour.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E01 | Fill fault | Open valve; clean inlet filter; test fill valve & pressure. |
| E02 | Heater fault | Test element & NTC; check relay/control. |
| E03 | Drain fault | Clear filter/air gap/hoses; test drain pump. |
| E04 | Overflow/leak | Inspect base float; dry tray; repair leak source. |
| E05 | Circulation pump error | Check pump windings & harness; replace if failed. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F1 | Control fault | Power reset; replace control if recurring. |
| F2 | Overheat | Test temp sensor & relays; replace failed part. |
| F3/F4 | Sensor open/short | Ohm sensor; repair wiring or replace sensor. |
| F9 | Door lock fault | Test latch motor/micro-switch; replace as needed. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| HI | High temp alarm | Clean condenser; check fans & seals; diagnose sealed system if needed. |
| LO | Low temp alarm | Verify setpoints; test control/NTC. |
| E1/E2 | Sensor faults | Ohm sensors; replace NTC/control as needed. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E10 | Fill fault | Clean inlet screens; test valves; verify pressure. |
| E20 | Drain fault | Clear filter/hoses; test pump. |
| E30 | Door lock fault | Test lock & strike; replace lock assembly. |
| E60 | Heating fault | Test heater & NTC; replace if failed. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E01 | Overheat/thermostat trip | Clean condenser & ducts; test thermostats/NTC. |
| E02 | Heater fault | Check element & relays; replace failed parts. |
| E03 | Motor fault | Test motor/capacitor; replace if defective. |
| E05 | Moisture sensor fault | Clean bars; check harness. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm