Faber Range Hood Repair Montreal
Specialized in-home Repair and Installation of Faber premium ventilation systems.
Specialized in-home Repair and Installation of Faber premium ventilation systems.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Faber Residential or Commercial appliances.
Flash Repair
We service Faber wall, island, ceiling and built-in inserts/power packs, plus downdraft systems. We fix motors, capacitors, LED drivers, touch PCBs and remote blowers, with clear, upfront pricing.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| FAN | Motor won’t start / hums | Test capacitor & windings; clear obstructions; replace motor or control. |
| LED | Lights flicker/not working | Test LED driver; replace driver/board or LED module. |
| KEY | Touch panel unresponsive | Power reset; reseat ribbon; replace touch PCB. |
| SPEED | Fan speeds not changing | Replace control/triac; check keypad. |
| VIB | Excess vibration | Tighten mounts/ducts; balance wheel; replace motor if bearings noisy. |
| ODOR | Poor capture | Check duct size/length; back-draft damper; make-up air. |
| NOISE | Rattle/scrape | Inspect blower wheel & housing; re-seat/filter pads. |
| SMOKE | Smoke escape at front | Increase capture area/height; verify CFM; correct install. |
| REM | Remote blower not responding | Check harness/power to remote; replace remote motor/control. |
| PF | Power failure | Verify supply; dedicated circuit; surge protection. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| FAN | Motor won’t start | Test capacitor/motor; replace control if no output. |
| LED | Lighting failure | Replace LED driver/board or modules. |
| KEY | Touch keys dead | Replace touch PCB; check harness. |
| SPD | Only one speed works | Replace control or triac pack. |
| VIB | Vibration/loose chimney | Tighten hardware; balance wheel. |
| REM | Remote blower/no comms | Verify wiring; replace remote board. |
| ODOR | Weak capture | Correct ducting, height, makeup air. |
| NOISE | Rattle/grind | Re-seat blower; replace bearings. |
| LCK | Child lock active | Unlock combo per manual. |
| PF | Power failure | Verify supply / breaker. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| FAN | Blower not running | Test motor & capacitor; replace control. |
| LED | Lighting failure | Replace LED driver/modules. |
| KEY | Switch PCB fault | Replace switch/board; rewire as needed. |
| SPD | Speed control failure | Replace triac pack/control. |
| REM | Remote blower comms | Check harness/board; replace remote unit. |
| ODOR | Capture complaints | Adjust baffles/filters; verify CFM/duct size. |
| NOISE | Vibration or rattle | Re-seat blower; tighten liner/mounts. |
| HOT | Driver overheats | Improve ventilation; replace driver. |
| LMP | Lamp socket failure (legacy) | Replace socket/housing. |
| PF | Power failure | Verify supply / breaker. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| RF | Remote control not pairing | Re-pair remote; replace RF board if needed. |
| LED | Driver overheat/failure | Replace driver; ensure cooling space. |
| FAN | Remote blower not starting | Check wiring/driver; replace blower. |
| SPD | Speed not changing | Replace control/triac board. |
| NOISE | Rattle/vibration | Secure framing; isolate mounts. |
| ODOR | Poor capture | Lower install height; increase CFM; verify duct. |
| KEY | Touch panel fault | Replace touch PCB. |
| PF | Power failure | Verify supply. |
| LCK | Child lock active | Unlock per manual. |
| HOT | Thermal cutout | Improve airflow; replace TCO. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| LIFT | Unit won’t raise/lower | Check lift motor/limit switches; replace actuator. |
| FAN | Blower not running | Test motor/driver; replace blower. |
| LED | Lighting fault | Replace driver/modules. |
| SPD | Speed control failure | Replace control/triac. |
| KEY | Touch switch failure | Replace keypad/board. |
| VIB | Vibration/noise | Tighten mount; balance wheel. |
| REM | Remote not responding | Re-pair/replace RF board. |
| ODOR | Poor capture | Correct ducting/CFM and makeup air. |
| PF | Power failure | Verify supply/breaker. |
| HOT | Thermal trip | Improve airflow; replace TCO. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm