Miele Appliance Repair Montreal
Meticulous in-home service for Miele built-ins and laundry. We use Miele-approved procedures and protect premium finishes. One-year parts & labour warranty on our repairs.
Meticulous in-home service for Miele built-ins and laundry. We use Miele-approved procedures and protect premium finishes. One-year parts & labour warranty on our repairs.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Miele Residential or Commercial appliances.
Flash Repair
Miele engineering uses sophisticated sensors, brushless motors and robust heaters. We carry common pumps, valves, sensors, inlet systems, circulation motors, door locks, boards and fans to resolve issues quickly.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F11 | Drain fault | Clear filter/hoses; test drain pump. |
| F12/F13 | Inlet fault / water intake | Open supply; clean screens; test inlet valve/flow meter/WSH. |
| F14 | Wash pump/circulation fault | Test BLDC pump; replace pump module. |
| F24 | Heater relay/temperature rise | Test heater/NTC; replace relay/board. |
| F32 | Door lock fault | Replace lock/actuator; check alignment. |
| F70 | Leak detected (float switch) | Dry base; fix leak; reset float. |
| F78 | Circulation pump fault | Replace pump; check cabling. |
| F79 | Communication error | Inspect CAN harness; replace module. |
| F84 | AutoDos/Dispenser | Service cartridge motor; replace if jammed. |
| F01 | Electronics fault | Power reset; replace board if persistent. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F220/F221 | Temp sensor open/short | Ohm RTD; replace sensor/harness. |
| F460 | Cooling fan fault | Replace fan; verify airflow. |
| F447 | Door lock error | Service lock motor & microswitches. |
| F255 | Overheat/runaway | Check relays; replace power module. |
| F100 | Electronics fault | Power reset; replace board. |
| F111 | Ignition failure (gas) | Check igniters/valves/pressure. |
| F143 | Touch/UI error | Replace touch module; reseat ribbon. |
| F170 | Comms error | Inspect bus harness; replace module. |
| LOC | System lock active | Unlock via UI; confirm. |
| PF | Power fail | Clear; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F1x | Sensor/NTC fault | Ohm sensors; replace NTC/board. |
| ALARM HI | High temp | Clean condenser; verify fans/compressor. |
| DOOR | Door open/switch | Adjust hinges; replace switch/gasket. |
| DF | Defrost error | Test heater/bi-metal/board output. |
| FAN | Evap/cond fan | Replace motor; check tacho/ice. |
| INV | Inverter fault | Measure DC bus; replace inverter/compressor. |
| ICE | Icemaker fault | Run test; replace module/valve. |
| UI | Comms/UI fault | Reseat connectors; replace UI/board. |
| Filter | Water filter reminder | Replace filter; reset. |
| PF | Power fail | Clear alarm. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F20 | Inlet fault | Open valves; clean screens; test inlet valve. |
| F21 | Drain fault | Clear pump/coin trap/hoses; replace pump. |
| F34 | Door lock fault | Replace lock/strike; check harness. |
| F53 | Motor fault | Test tach/speed control; replace drive. |
| F51 | Unbalance/tacho | Level; inspect shocks; check sensor. |
| F10 | Water level sensor | Check pressure hose; replace sensor. |
| F63 | Heater relay | Replace relay/power module; test element. |
| F138 | Leak detected | Inspect hoses/boot; reset float. |
| F92 | Communication fault | Inspect bus; replace module. |
| PF | Power fail | Clear; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F55 | Airflow restriction | Clean filters/condensers/ducts; check blower. |
| F66 | NTC sensor fault | Replace thermistor/board channel. |
| F50 | Heater fault | Test heater/relay; replace power module. |
| F92 | Communication fault | Inspect harness; replace PCB. |
| F148 | Overheat protection | Check airflow; reset hi-limit. |
| F30 | Door switch/lock | Replace switch/lock; adjust strike. |
| F28 | Moisture sensor fault | Clean strips; replace sensor. |
| F20 | Inlet water fault (steam) | Open supply; test valve. |
| PF | Power failure | Clear; verify supply. |
| LOC | System lock active | Unlock via UI. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm