Gibson Appliance Repair Montreal
Specialized in-home Repair and Installation of legacy Gibson appliances (brand within the Electrolux family). OEM-quality parts, clear estimates, one-year warranty.
Specialized in-home Repair and Installation of legacy Gibson appliances (brand within the Electrolux family). OEM-quality parts, clear estimates, one-year warranty.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Gibson Residential or Commercial appliances.
Flash Repair
We service older and current Gibson refrigerators, ranges, dishwashers and laundry units. Many share platforms with Frigidaire/Electrolux, which helps with parts availability and fast repairs.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F10 | Runaway temperature | Test RTD & stuck relays; replace failed part. |
| F30/F31 | Oven sensor open/short | Replace RTD or control as indicated. |
| F90 | Door lock/latch error | Service lock motor & switches. |
| E0 | Keypad not responding | Reseat ribbon; replace UI. |
| F14 | Touch panel fault | Replace touch control/overlay. |
| Ign | Ignition failure (gas) | Measure igniter current; replace igniter/valve. |
| Fan | Cooling fan error | Replace fan motor/tacho. |
| PF | Power failure | Clear and retest. |
| LOC | Control lock | Unlock per manual. |
| Probe | Meat probe fault (select) | Replace probe/jack/control. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| i10 | Fill fault | Open valve; clean screen; test inlet valve & pressure. |
| i20 | Drain fault | Clear filter/hoses; test drain pump. |
| i30 | Leak in base | Dry tray; repair leak source. |
| i60 | Heating fault | Test element & NTC; verify relay. |
| i50 | Wash motor error | Check circulation pump; replace if failed. |
| UO | Vent fan open | Test/replace vent fan. |
| CL | Child lock active | Unlock per manual. |
| PF | Power failure | Clear; check supply. |
| i40 | OWI/turbidity fault | Clean sensor; replace OWI. |
| i80 | Control fault | Replace main board if persistent. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H | High temperature alarm | Clean condenser; test fans; sealed-system check. |
| d | Door open | Adjust hinges; replace switch/gasket. |
| E1/E2 | Thermistor faults | Ohm sensors; replace NTC/control. |
| DF | Defrost error | Test heater/bi-metal/timer/ADC. |
| ICE | Icemaker harvest/fill fault | Run IM test; replace module/valve. |
| FAN | Evap/condenser fan fault | Replace fan motor; clear ice/debris. |
| CF | Control failure | Replace board if persistent. |
| Filter | Filter reminder | Replace filter; reset indicator. |
| INV | Inverter/compressor error (select) | Test inverter & compressor. |
| PF | Power failure | Clear alarm; verify supply. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E11 | Fill fault | Clean inlet screens; test valves; verify pressure. |
| E21 | Drain fault | Clear filter/hoses; replace pump if weak. |
| E41/E42 | Door/lock open | Replace door lock assembly. |
| E52 | Tacho/motor fault | Test motor & speed sensor; replace as needed. |
| E35 | Overfill / pressure switch | Inspect pressure hose; replace switch. |
| E66 | Heater relay fault (front-load) | Replace control/relay board. |
| E68 | Heater leakage to ground | Insulation test; replace element. |
| EF5 | Unbalance detected | Level unit; inspect shocks/springs. |
| CL | Child lock active | Unlock per manual. |
| PF | Power failure | Clear and retest. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| E64 | Heater open (electric) | Test element & relays; replace failed part. |
| E68 | Leakage to ground | Insulation test; replace element. |
| E8C | Low airflow / vent restriction | Clean vent & lint path; check blower. |
| E5B | No heat (gas/electric) | Check igniter/gas valve or element/thermostats. |
| E32 | Humidity sensor fault | Clean bars; replace sensor PCB. |
| E41 | Door switch fault | Replace door switch/latch. |
| tS/tF | Thermistor short/open | Ohm NTC; replace sensor/control. |
| L2 | Low line voltage | Verify supply/breaker/receptacle. |
| PF | Power failure | Clear and retest. |
| LOC | Control lock active | Unlock per manual; verify UI. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm