AVG Appliance Repair Montreal
Specialized in-home Repair and Installation of AVG refrigeration, wine cellars, and ventilation products.
We Offer our services in
Specialized in-home Repair and Installation of AVG refrigeration, wine cellars, and ventilation products.
We Offer our services in
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
AVG Residential or Commercial appliances.
Flash Repair
Need AVG appliance service in Montreal? Our certified technicians provide in-home repair across Montreal, the West Island, Laval, and the South Shore. We diagnose quickly, carry common AVG parts to resolve most issues on the first visit, and give clear, upfront pricing before any work begins.
After the repair, your technician will fully test the product, answer your questions, and share simple maintenance tips to help prevent future problems. Every job is backed by a one-year warranty on parts and labour for peace of mind.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H | High temperature alarm | Acknowledge alarm; verify cooling, condenser airflow, and door seals; diagnose sealed-system if needed. |
| d | Door open alarm | Close door fully; test door switch and hinges; adjust or replace as needed. |
| E (sensor) | Thermistor/sensor out of range | Ohm relevant sensors; repair wiring; replace failed sensor or control. |
| Filter | Replace water filter reminder (if equipped) | Install new filter; reset indicator per model instructions. |
| Lock | Controls locked (child lock) | Hold lock/unlock per panel legend to restore keypad. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| H / HI | High temperature alarm | Check condenser/fans, clear dust, verify door gasket; test sensors and control. |
| L / LO | Low temperature alarm | Verify setpoints; test sensor calibration and control relay. |
| E1/E2 | Cabinet or evaporator sensor fault | Inspect/ohm NTCs; repair wiring; replace sensor or control module. |
| d | Door open alarm | Level cabinet; check hinges/gasket; adjust strike or replace gasket. |
| PF | Power failure / interruption | Reset; verify supply, breaker, and surge protection. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| Fan speed fault | Motor not reaching target speed / humming | Check capacitor, motor windings and wheel; clear obstructions; replace motor or control. |
| Lighting failure | LEDs not illuminating / flicker | Test LED driver and board; verify connectors; replace failed driver/board. |
| Touch panel unresponsive | Keys not registering / stuck | Power reset; reseat ribbon; replace touch PCB or control. |
| Excess vibration | Imbalance or loose mount | Tighten mounts/ductwork; balance wheel; replace motor assembly if needed. |
| Grease/smoke escape | Poor capture or CFM mismatch | Verify duct size/length and back-draft damper; install proper makeup air; correct install. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm