Dacor Appliance Repair Montreal
Specialized in-home Repair and Installation of Dacor professional cooking and premium built-in refrigeration.
Specialized in-home Repair and Installation of Dacor professional cooking and premium built-in refrigeration.
Our technicians are trained to focus on certain brands to improve efficiency
Give us a call, we will send a professional repairman to your home that specializes on your brand.
Dacor Residential or Commercial appliances.
Flash Repair
Need Dacor service in Montreal? We repair Modernist/Heritage/Renaissance ranges, wall ovens, rangetops and Dacor column/french-door refrigeration. Technicians carry common OEM parts and provide clear, upfront pricing.
After the repair, your technician fully tests the unit, answers questions, and shares care tips. Every job is backed by a one-year parts & labour warranty.
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| F0/F1 | Control/keypad fault | Power reset; reseat ribbon; replace touch panel or EOC if code returns. |
| F2 | Oven over-temperature / runaway heat | Verify RTD resistance, stuck relay; replace sensor or control as indicated. |
| F3 | Oven sensor (RTD) open | ~1080Ω @ 70°F expected; repair harness or replace RTD. |
| F4 | Oven sensor shorted | Inspect wiring for shorts; replace RTD or control if reading near 0Ω. |
| F5/F7 | Key stuck / function key short | Clean/replace membrane; service UI or EOC. |
| F8 | Cooling fan speed/feedback low | Check fan motor & tacho; replace fan or control. |
| F9 | Door lock/latch fault (self-clean) | Test latch motor & switches; repair harness; replace latch assembly. |
| Err05 | Ignition failure (gas bake/broil) | Check igniter draw (≥3.2–3.6A typical); replace igniter or gas valve. |
| Err30 | Communication error UI ⇄ control | Inspect connectors, line voltage quality; replace control/UI if persistent. |
| PF | Power failure detected | Clear; verify supply/breaker/neutral; retest operation. |
| Fault/Code | Condition/Description | Solution |
|---|---|---|
| HI / H1 | High temperature alarm | Clean condenser; verify condenser/evap fans; test sealed system performance. |
| d | Door open alarm | Level cabinet; adjust hinges/strike; test door switch & gasket. |
| E1/E2 | Cabinet/evaporator sensor fault | Ohm NTCs; repair harness; replace sensor or control. |
| E5 | Icemaker fill/harvest fault | Run service mode; test valve, fill tube heater, and IM motor; replace failed part. |
| E7 | Defrost error / heater open | Test heater & bi-metal; inspect wiring; replace control if no drive. |
| E8 | Evaporator fan error | Check fan voltage/feedback; replace motor if stalled/noisy. |
| E9 | Condenser fan error | Verify rotation & supply; replace fan or control. |
| E10 | Inverter/compressor communication | Confirm DC supply & signals; test inverter; replace inverter or compressor if needed. |
| Filter | Water filter reminder | Install new filter; reset indicator. |
| PF | Power failure/interruption | Clear alarm; verify dedicated circuit and surge protection. |
Monday to Friday
7:00am - 9:00pm
Saturday
10:00am - 5:00pm
Sunday
12:00am - 5:00pm